What P287A means
Clutch B cannot leave the engaged state when release is commanded.
How the engine computer detects it
Torque transfer continues unwanted.
Written from public technical sources and not yet checked by a mechanic. How we write these pages
Symptoms
- Check engine or transmission warning light on
- Harsh, delayed, or missing shifts
- Possible limp mode (locked in one gear)
- Slipping or shuddering during gear changes
Common causes
- Clutch actuator stuck at high pressure Most likely
- Hydraulic return path blocked Possible
How to diagnose P287A
- Read every stored code with an OBD-II scanner. If misfire or fuel trim codes are there too, fix those first: they often cause this one.
- Inspect the parts involved: clutch b, clutch actuator b, valve body.
- Work through the causes above from most to least likely, cheapest checks first.
- Clear the code and drive a full drive cycle to confirm the repair held.
Vehicles that report P287A most
| Vehicle | Years | Reports | Share | Median miles |
|---|---|---|---|---|
| Ford Focus | 2012–2018 | 9 | 85k |
Counts of owner complaints to the NHTSA that mention P287A (9 in total), not failure rates: popular models get more complaints simply because more of them are on the road. Models with fewer than 3 complaints are left out.
Reading the code
- P
- Powertrain
- 2
- Generic (SAE) code
- 87A
- Specific fault
Questions drivers ask
Can I drive with code P287A?
If the car shifts normally, drive gently to a shop. If it's stuck in one gear, slips, shifts harshly or won't move out of Park, don't drive it: have it towed.
This page is general information, not a substitute for a professional diagnosis. Repair costs are rough estimates for parts and labor and vary by vehicle and region.